Uploading¶

If a station setup was calculated separately (not using the on-board software), it has to be uploaded to the instrument. This command allows to set the station coordinates, instrument height and orientation.

Requirements¶

• GeoCOM capable total station

Usage¶

iman upload station¶

Upload station setup to instrument.

This program cen be used to update the station coordinates and height, and/or the orientation or azimuth.

This command requires a GeoCOM capable total station.

iman upload station [OPTIONS] PORT

Options

-b, --baud <baud>¶

Serial speed

Options:¶

1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 56000 | 57600 | 115200 | 230400 | 921600

-t, --timeout <timeout>¶

Serial timeout

-a, --attempts <attempts>¶

Number of connection attempts

--sync-after-timeout¶

Attempt to synchronize message que after a timeout

-c, --coordinates <coordinates>¶

Station coordinates

-i, --instrumentheight, --iheight <instrumentheight>¶

Instrument height

-o, --orientation <orientation>¶

Instrument orientation correction

-a, --azimuth <azimuth>¶

Current azimuth

Arguments

PORT¶

Required argument

Serial port that the instrument is connected to (must be a valid identifier like COM1 or /dev/usbtty0)